Davenport and Brown & Sharpe Tips and Guides
Hye-Tech Machine provides these Product Bulletins & Technical Guides as a helpful service and is not responsible for its content.
Davenport Product Bulletins
- Product Bulletin: SB-849-200 Coolant Pumps
- Product Bulletin: 8-SA-OS Oversize Revolving Head
- Product Bulletin: 9-27 Stationary Heads
- BP-600 Cam Operated Rear Brake
- 1605-SA Pneumatic Collet Chucking
- 5020-20-SA Pneumatic Collet Latch System
- Improved Machine Enclosure with Door Interlocks
- Needle Bearing Locating Lever Stud Assembly (624-2-SA)
- Product Bulletin: 132EG Series Slides
- Model B 2-Piece Threading Shaft (5080-226-49-2PC-SA)
- 5080-329-78-SA Motorized In-Line Chip Conveyor
- 111 Series Product Improvement Bulletin
- 1263-119-5-NB-RK Needle Bearing Style Countersink Lever Stud Retrofit Kit
- 328 Chuck Slide
- 335-U-SA Quick Change Tool Spindle Front Box
- 5080-131-3 Rollaway Clutch Body with Wear Plates
- 5080-139-1-SA Rear Worm Drive Shaft – Regular Bed – 2Pc. Assembly
- 5080-2103-9 NTRP Spindles with Welded Key
- 5080-2103 and Inner Spindle Family
- 5080-226-41-2 Clutch Body
- 5134-1 Geneva Motion Star Wheel
- 627-NB-SA and 627-NB-RK Needle Bearing Tool Arm Stud Assembly & Retrofit Kit
Davenport Technical Tips
- 5133-R Revolving Head Gear: New Design
- Barrel Chuck: Distinct Advantages
- Revolving Head: How to Check Locating Blocks
- Adjusting the Clutch Properly
- Cross Slide Installation and Adjustment
- Fitting the Slotter Spindle, Collar and Head
- Installation of the Locating Lever
- Getting the Proper Fit on a Rollaway Clutch
- Removing/Reinstalling Threading without Removing the Pulley
- Slotter Inspection: What’s Included
- Spindle Break-In Procedure
Brown & Sharpe Troubleshooting Guides
Spindles: click here
- Removing the Spindle Chain Idler Pulleys
- Replacing the Spindle Chain
- Removing the Spindle Drive Motor on #00, 2 and 3 Ultramatics
- Fitting Washers to the Spindle Assembly on older machines with Sprocket bearing Retainer Coil Springs
- Setting Spindle Clutches
- Preventative Maintenance of Base and Spindle Clutches
- Assembly of Ultramatic Spindle Ball Bearings
- Installing Clutch Body Keys and Clutch Lever Inserts
Turret Slide: click here
- Installing Chip Wipers on #2 and #3 Turret Slides
- Replacing Turret Locking Pin Bushings on #00, #2 and #3 machines
- Removing the Turret Slide Return Springs on Constant Stroke Turret Slides
- Assembling the Turret Change Shaft on #2 machines
- Replacing the Turret Change Shaft Adjusting Gear and Turret Return Shaft on #00 machines
Bed: click here
- Setting the preload on #2 Withdrawal Cam
- Adjusting the preload on the Withdrawal Cam Shaft
- Replacing the Worm Wheel and Cam Drives on CNC machines
- Replacing the Worm Shaft on CNC Machines
- Changing to a Double Shear Arrangement to reduce lead cam pin breakage
- Timing of Cam Shafts
- Replacing the Lead Worm Shaft
Manuals
- Click here to view technical literature and manuals available from Hye-Tech. Make note of the manual number and call us at 888-484-9900.
Most orders are shipped the same day to points all over the world.